User`s guide

10. Reboot the system.
11. Continue the installation with Installing on a VMware Guest OS on page 14.
Installing on a VMware Guest OS
Note: You must complete the steps in Installing on VMware ESX 4.1 on page 12 or
Installing on VMware ESXi 5.0 on page 13 before continuing.
To install ARCCONF on a VMware guest operating system:
1. Insert the Adaptec Installation DVD.
2. Go to the ASM-MANAGER-GOS directory for the remote operating system you want to install.
3. Type one of the following commands, depending on the operating system:
DescriptionOptions
./StorMan-9.00-19098.esx86_64.binLinux
setup_asm_esx_x64.exeWindows
Starting the Command Line Utility
1. To start ARCCONF, enter one of the following commands:
DescriptionOptions
<install_dir>\arcconf.exeWindows
/usr/<install_dir>/arcconfLinux
/usr/StorMan/arcconfSolaris
/<install_dir>/arcconfFreeBSD
/usr/StorMan/arcconfVMware
where Install_dir is the directory where the utility is installed.
2. To see a list of available commands, type ARCCONF at the prompt.
14Proprietary and Condential to PMC-Sierra, Inc.
Document No.: CDP-00276-01-A Rev. A, Issue:
Adaptec RAID Controller Command Line Utility User's Guide