User`s guide

3
3 Connect your video device to your AVC-2210 using the
included A/V cable. Your device may need a proprietary cable.
4 Connect the AVC-2210 to your computer using the provided
USB cable.
5 Turn on the AVC-2210 by pressing the Power button. The LED
on the front of the AVC-2210 will light up orange when first
powered on.
Windows detects the AVC-2210 and starts the Found New
Hardware wizard. This wizard steps you through the process of
installing the necessary driver.
6 Follow the on-screen instructions.
■ If you are using Windows 98SE, you may need your
Windows 98SE CD to complete the installation.
■ If you are using Windows 98SE and the driver file being
installed from the VideOh installation CD is older than the
existing driver file, you may get a version conflict message.
Select to keep the newer driver file.
Connect red audio plug to red
audio port and white audio
plug to white audio port
Connect yellow video plug to
yellow video input port
AVC-2210 QSG.book Page 3 Friday, April 4, 2003 1:54 PM