User`s guide

Installing Your AVC-2000

To install your AVC-2000 adapter:

1 Discharge any static electricity build-up before handling the

AVC-2000 adapter by touching a grounded metal object (such

as the exposed metal parts on the back of your computer).

2 Turn off power to the computer and disconnect the power cord.

Open the computer cabinet, following the manufacturer’s

instructions.

3 Locate an unused PCI expansion slot and remove the expansion

slot cover. Save the slot cover screw for use in Step 6.

4 Remove the AVC-2000 adapter from its antistatic packaging.

Caution: Always handle the adapter by its edges or metal

bracket. Do not touch the gold PCI connector or any

components on the card.

PCI expansion slots

Expansion slot cover

VideOh PCI AVC-2000 Book.book Page 5 Thursday, September 26, 2002 2:19 PM