Specifications

VERIFY.NET FOR ADMINISTRATOR’S GUIDE
Driver Installation for Eltron/Zebra P420/P420C
1. If the printer is connected to the computer via USB, disconnect the USB cable from the
computer before proceeding. You will be asked to reconnect during the installation wizard.
2. Turn on the printer.
3. Download
http://www.omicrontech.net/Support/Verify.NET/IDCardPrinter/P420_DRV_v2.1B11.exe
to your desktop.
4. Double-click on the downloaded file.
5. Click Run, Allow, or Yes buttons for any security dialogs.
6. Click Setup.
7. Click Next.
8. When dialog appears instructing you to connect and turn on any USB printers, go ahead and do it
and then click OK. Please wait while it installs the Language driver.
9. When the Printer Port selection screen appears, select the port for your printer and click Next.
a. If Parallel was selected, select the Local Port type:: LPT1, LPT2, or LPT3. Most of the
time, the local port selection will be LPT1.
b. If USB was selected, the wizard will automatically locate the printer port.
10. Click Next.
11. The Driver will now be installed.
12. When you see “Printer driver installed successfully” in the memo box, click on the Finished
button.
Page 23 of 27 OTI Proprietary and Confidential Rev. 2.0 – 8/20/2010