Specifications

VERIFY.NET FOR ADMINISTRATOR’S GUIDE
Page 19 of 27 OTI Proprietary and Confidential Rev. 2.0 – 8/20/2010
Chapter
4
Installing Temporary ID Printers
This chapter guides the installer through the installation process for the various Temporary ID printers
that can be used for Verify.NET. The following sections are included:
• Listing of compatible Temporary ID printers
• Detailed instructions for installing printer drivers
• Post driver installation instructions to enable printing in Verify.NET
Getting Ready
Before starting on any procedure in this chapter, ensure you are logged in as a computer admin. In most
cases this is the ‘techco’ user account for the local machine. Please contact the tech coordinator of the
school for this information.
Additionally, make sure that Deep Freeze, Fortress, or any other security software is disabled. Installing
printers and software while security software is active can cause error messages or a complete reversal of
the installation process on a computer reboot.
Supported Printers
Verify.NET is capable of sending a print job to any printer that has a windows driver (shows up under
the Windows XP Control Panel under Printer and Faxes). Although support is not guaranteed for all
printers, the following printers have been tested to successfully print a temporary ID:
• Dymo LabelWriter 330 Turbo
• Dymo LabelWriter 330
• Dymo LabelWriter 400 Turbo
Determining Printer Model
Dymo printers display the printer model on the front of the printer. Other printer manufacturers will
have different modeling specifications. Check with your vendor or place of purchase for further details.
Installing Temporary ID Printer Drivers
If the printer you are using has not already been installed on the computer, insert the driver CD or
download the driver from the manufacturer’s website. If you were able to print temporary IDs from the