Specifications

VERIFY.NET FOR ADMINISTRATOR’S GUIDE
Page 14 of 27 OTI Proprietary and Confidential Rev. 2.0 – 8/20/2010
Chapter
3
Installation Procedures for Taking Pictures
This chapter guides the installer through the installation process for the various video capture devices that
can be used for Verify.Net in taking pictures. Topics include:
• Listing of compatible video capture devices
• Instructions on how to install the video capture devices
• Testing to confirm operation
• Post printer driver installation instructions to enable video capture in Verify.Net
Before starting on any procedure in this chapter, ensure you are logged in as a computer admin. In most
cases this is the ‘techco’ user account for the local machine. Please contact the tech coordinator of the
school for this information.
Additionally, make sure that Deep Freeze, Fortress, or any other security software is disabled. Installing
printers and software while security software is active can cause error messages or a complete reversal of
the installation process on a computer reboot.
Supported Devices
Verify.NET should work with all video capture devices that appear in the Scanners and Cameras Control
Panel. However, support and compatibility is not guaranteed. The following devices have been
successfully tested and confirmed to work with Verify.NET
• Belkin F5U228 Hi-Speed USB 2.0
• Logitech QuickCam 9000
• Adaptec AVC-1100
Installing the Video Capture Device
If a Verify.Net compatible video capture device is not installed, follow instructions below for your video
capture device:
Belkin F5U228 Hi-Speed USB 2.0
Before beginning driver installation, make sure the video capture device is not plugged into the computer.
1. Download http://www.omicrontech.net/Support/Verify.NET/picturecapture/f5u228setup.exe and
save to you desktop.