Specifications

VERIFY.NET FOR ADMINISTRATOR’S GUIDE
11. If Control Panel is in Category View, select Printers and Other Hardware and then open Printers
and Faxes. If in Classic View, select Printers and Faxes.
12. Click on Add a Printer in the left pane.
13. Click Next.
14. Select Local printer attached to this computer and uncheck Automatically detect and install my
Plug and Play printer. Click Next.
15. Select the printer port. If you have a parallel port model, this will almost always be LPT1. If it’s
USB, set it to USB001. Click Next.
16. Click the Have Disk button on the screen that follows.
17. Click Browse and then select the Star folder on your desktop from the Look in: drop down. Open
the StarRas folder and double click on OEMPRINT.INF.
18. Click OK to continue.
19. Scroll down the list of printer choices and select Star TSP643 Raster Printer
and click Next.
20. If you are presented with a Use Existing Driver screen, select Replace existing driver and click
Next.
21. Set the printer name to Verify.NET Tardy Pass Printer and click Next.
22. Set Printer Sharing to Do not share this printer and click Next.
23. Set it to print a test page and click Next.
24. Click Finish and wait for driver installation to complete. This may take several minutes.
25. After the wizard is complete, plug the printer into the computer if it is a USB model and turn it
on.
26. Check to see if a test page has printed. If it did continue to the next section, Installation of
Tardy Pass Page Settings.
27. If a test page did not print, right click on the new printer and select Properties…
28. Click on the Ports tab and then select another port, either LPT2, LPT3, or the various USB###
ports.
29. Click Apply. If the test page prints, you may continue to the next section. If not, repeat this step.
IMPORTANT: If you encounter any security permission error messages (cannot access files) while
installing the driver, ensure that the account you are logged in under Windows has the correct Windows
level permissions. Make sure you are logged in as ‘techco’ or another Windows administrator account that
has sufficient permissions.
Installation of Tardy Pass Page Settings
Verify.NET requires that the page settings for the Tardy Pass printer be defined at the Windows driver
level. To do this in Windows XP, you will need to do the following:
Page 11 of 27 OTI Proprietary and Confidential Rev. 2.0 – 8/20/2010