Specifications

VERIFY.NET FOR ADMINISTRATOR’S GUIDE
Installing Tardy Pass Printer Driver
If the printer is not already installed on the computer, insert the driver CD or download the driver from
the manufacturer’s website. If you were able to print tardy passes from the old Verify/LSIMSxp, the
driver has already been installed and you can then skip to the Installation of Tardy Pass Page Settings
section.
Follow the onscreen instructions to the complete driver installation. If given a menu to select a printer
model and port, ensure that the correct model and port is selected. If the printer has a USB connection,
do not plug the printer into the computer until the driver installation asks you to do or until the
installation is fully complete, including any computer restarts.
Driver Installation for Star TSP 143U
1. Make sure the printer is NOT connected to the computer.
2. Insert the CD that came with the printer or download the CD/Driver from http://www.star-
micronics.co.jp/eng/dl/dl02_07_02tsp1.htm.
3. Follow the on-screen instructions to complete the driver installation wizard.
4. After the driver installation is complete, plug the printer into the computer.
5. Windows will detect the new printer and configure it. This may take a few minutes.
6. When complete, ensure Windows recognizes the printer by going into the Control Panel /
Printers and Faxes.
7. If you do not see the new printer (Star TSP143U), press the F5 key while in on Printers and Faxes
page to refresh the screen.
Driver Installation for Star TSP 643
1. If your printer is the USB model, make sure it is off and not connected to the computer.
2. Download the driver from
http://www.omicrontech.net/Support/Verify.NET/TardyPrinter/StarTSP600.zip
and extract
the setup program, RasterDrv_2K-XP_20070328.exe, to your desktop from the zip file.
3. NOTE: Attempting to run the setup program from within the zip file may fail.
4. Run the setup program from your desktop and click OK to the welcome message.
5. Since the Automated Printer Install method fails more often than it succeeds, we will perform the
manual installation process.
6. Click on the Extract files for installation via the Windows Add Printer Wizard
button.
7. Select No for the Status Monitor installation option.
8. Click OK to confirmation message.
9. Click Exit to close the setup program.
10. Browse to the Control Panel.
Page 10 of 27 OTI Proprietary and Confidential Rev. 2.0 – 8/20/2010