User`s guide

readme.txt

improperly removed and/or re-inserted with charge still present.

Solution: Plug the Super Cap connector in when the system is OFF

and, if the yellow activity LED is illuminated on the ZMM-100DB

daughterboard attached to RAID Controller, wait for the LED

activity indicator to go out. This may take several minutes.

The system should then boot normally.

--------------------------------------------------------------------

This software contains the valuable trade secrets of Adaptec or its

licensors. The software is protected under international copyright

laws and treaties. This software may only be used in accordance with

the terms of its accompanying license agreement.

No part of this publication may be reproduced, stored in a retrieval

system, or transmitted in any form or by any means, electronic,

mechanical, photocopying, recording or otherwise, without prior

written consent of Adaptec, Inc., 691 South Milpitas Blvd.,

Milpitas, CA 95035.

Page 6