User`s guide

Series-2-3-5-Controller_Readme_8_2010.txt
stripe size. No data is lost, however.
Known migrations that result in a FW crash include:
o 16/32/64/128 drive R0- 256/16 to 16/256 stripe change
o 16/32/64/128 drive R0- 512/16 to 16/512 stripe change
o 16/32/64/128 drive R0- 1024/16 to 16/1024 stripe change
o 16/32 drive R5- 16 to 512/1024 stripe change
o 16/32 drive R5- 512/1024 to 16 stripe change
o 16/32 drive R6- 1024/16 to 16/1024 stripe change
4.27 Hot-Adding MaxIQ SSDs
If you remove two or more MaxIQ SSDs and then re-insert
them at the same time, only one will be recognized as part
of the MaxIQ pool. To reconstitute the pool, use Adaptec
Storage Manager or the BIOS Utility to reconfigure
the MaxIQ cache.
.
--------------------------------------------------------------------
(c) 2010 Adaptec, Inc. All Rights Reserved.
This software contains the valuable trade secrets of Adaptec or its
licensors. The software is protected under international copyright
laws and treaties. This software may only be used in accordance with
the terms of its accompanying license agreement.
No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without prior
written consent of Adaptec, Inc., 691 South Milpitas Blvd.,
Milpitas, CA 95035.
Page 8