User`s guide

Series-2-3-5-Controller_Readme_8_2010.txt
4.4 Using the Controller with an Adaptec S50 JBOD Enclosure
4.5 UnixWare and OpenServer
4.6 OpenServer 6.0
4.7 SuSE Linux Enterprise Server 10 with Service Pack 2
4.8 Hot-adding Disk Drives
4.9 SuperMicro Disk Drive Enclosures
4.10 Using the Controller with a Seagate Barracuda 1TB SATA Drive
4.11 Intel SE7525RP2 and SE7320EP2 Motherboards
4.12 Windows Server 2008 64-Bit SCSIport Driver
4.13 Boot Drive Failure after OCE/RLM
4.14 Online Capacity Expansion (OCE) Limits
4.15 Power Management under FreeBSD
4.16 Using RAID10 under FreeBSD
4.17 Power Management with Seagate SAS Drive ST31000640SS
4.18 Linux Cache Synchronization
4.19 Listing Devices in VMware ESX 4.0 Console
4.20 BIOS Hangs When Booting RAID Controller with Batteryless Backup (ZMCP)
4.21 Updating Firmware on Hitachi HUS1514xxVLS300 SAS drives
4.22 Installing Windows OS from Direct-Attached Non-DASD Device
4.23 MaxIQ SSD Cache Performance
4.24 Exceeding 2TB LUN Size on VMware ESX Server
4.25 PHY Rate Limitations on Western Digital Hard Drives
4.26 Changing the Stripe Size for Large RAID Arrays
4.27 Hot-Adding MaxIQ SSDs
--------------------------------------------------------------------
1. Software and Documentation
1.1. Controller & Utility Software
- Adaptec Firmware/BIOS/Driver/Utilities Version 5.4
NOTE: The latest versions of firmware, BIOS, driver software
and utilities can be downloaded from the Adaptec Web Site at
www.adaptec.com.
- Windows Drivers, All Controllers
Page 2