User`s guide

4.32 RAID Array Creation Issue With STEC MACH 8 SSDs
--------------------------------------------------------------------
1. Software and Documentation
1.1. Controller & Utility Software
- Adaptec Firmware/BIOS/Driver/Utilities Version 7.2
NOTE: The latest versions of firmware, BIOS, driver software and
utilities can be downloaded from the Adaptec Web Site at
www.adaptec.com.
- Drivers on this DVD
The drivers on this DVD have been tested and certified on
the following operating systems. In general, you can load
the drivers on out-of-box operating system versions, the
latest service pack, or software update. Compatibility
issues may be seen with untested OS versions.
NOTE: Not all operating systems are supported by all
controllers. See notes below.
- Windows Drivers
o Windows Server 2008, 32-bit and 64-bit
o Windows Server 2008 R2, 64-bit
o Windows Server 2003*, 32-bit and 64-bit
o Windows Server 2003 R2*, 32-bit and 64-bit
o Windows Vista, 32-bit and 64-bit
o Windows 7, 32-bit and 64-bit
*Not Supported on Adaptec Series 6E Controllers
- Linux Drivers
o Red Hat Enterprise Linux 5.5, IA-32 and x64
o Red Hat Enterprise Linux 6.0, IA-32 and x64
o SuSE Linux Enterprise Server 10, IA-32 and x64
o SuSE Linux Enterprise Server 11, IA-32 and x64
o Debian Linux 5.06, IA-32 and x64
o Ubuntu Linux 10.04, IA-32 and x64
o Fedora Linux 11, 12, IA-32 and x64
- FreeBSD Drivers
o FreeBSD 7.4, 8.x
- SCO Drivers*
o OpenServer 6.0 MP4
o UnixWare 7.1.4
*Not Supported on Adaptec Series 6/6E Controllers
- VMware Drivers
o VMware ESX Classic 4.1 (vSphere)
- Sun Solaris Drivers
o Solaris 10
1.2. Documentation on this DVD
- Adaptec SAS RAID Controllers Installation and User's Guide
- Adaptec RAID Controller Command Line Utility User's Guide
- Adaptec SAS RAID Controllers Quick Start Guide
2