Product guide

73
Chapter Four Configuration Software and Utilities
Security Add-in
Under this window, you can set the User and Administrator passwords, and Security
options.
To Set the User Password
1. Click on the user password button.
2. Enter the password in the first field.
3. Confirm the password by entering it again in the second field.
To Change or Clear the User
Password
1. Click on the User password button.
2. Enter the old password in the first field.
3. Enter the new password in the second field (or leave blank to clear).
4. Confirm the password by entering it again in the second field (or leave blank
to clear).
To Set the Administrator
Password
1. Click on the Administrator password button.
2. Enter the password in the first field.
3. Confirm the password by entering it again in the second field.
To Change or Clear the
Administrator Password
1. Click on the Administrator password button.
2. Enter the old password in the first field.
3. Enter the new password in the second field (or leave blank to clear).
4. Confirm the password by entering it again in the second field (or leave blank
to clear).
Security Options Under this window, you can set the other security options:
q Hot Key - Set a key sequence that, when pressed, will drop the server into
secure mode.
q Lock-Out Timer - Set an interval that, if no activity takes place during it,
will drop the server into secure mode.
q Secure Boot Mode - Force the server to boot directly into secure mode.
q Video Blanking - Turn the video off when the server is in secure mode.
q Floppy Write - Control access to the diskette drive while the server is in
secure mode.
q Reset / Power Switch Locking - Control the power and reset buttons while
the server is in secure mode.