Product guide

62
Chapter Four Configuration Software and Utilities
Console Redirection Submenu
Feature Choices Description
COM Port Disabled When Enabled, console
Address redirection uses the I/O Port
specified.
3F8 Typically COM1
2F8 Typically COM2
3E8 All keyboard/mouse and video
functions will be directed to this
port. This is designed to be used
only under DOS in Text Mode.
IRQ # N/A Information field only
Baud Rate 9600 When console rediection is
19.2k Enabled, specifies the Baud Rate
38.4k to be used.
115.2k
Flow Control No Flow Control None disallows flow control.
CTS/RTS Hardware-flow control.
XON/XOFF Software-flow control.
CTS/RTS + CD Hardware plus carrier-detect flow
control
PEP Management Submenu
Feature Choices Description
PEP Filter Enters submenu
Events
PEP Enable Disable Enables Platform Event Paging
Enable
PEP Blackout [0...9] Sets the amount of time
Period between pages in minutes.
Valid range is from 0 to 10.
PEP Page Sets the string used to page
String you. Generally this is the
attention command for your
modem, followed by the
number of your paging service,
followed by the message you
want to appear on the pager,
followed by a modem hang-up
command. Use commas for 1-
second pauses.
This field is only 16 characters
long. The 16-31, 32-47 and 48-
63 fields are a continuation of
the PEP Page String Field so
you can enter in another 48
characters for 64 characters
total.
16 - 31 This is a continuation of the
PEP Page String Field. When
16 characters are typed into the
Modem Init String field, this field
will appear to allow another 16
characters to by typed in.
Verify in the BIOS Set-up for the server board whether or not
the system BIOS includes PEP. If not, when it becomes
available, you can download it from the Micron Web Site:
www.micronpc.com