Product guide
61
Chapter Four Configuration Software and Utilities
Feature Choices Description
Modem Init AT&F0S0=1S14=0&D
String Sets the initialization string for the
String modem being used for
EMP. Used in EMP modem mode.
This field is only 16 characters
long. The High Modem Init String
field is a continuation of the
Modem Init string so you can
enter in another 4 characters.
High Modem 0 This is a continuation of the
Init String Modem Init String. When 16
characters are typed into the
Modem Init String field, this field
will appear to allow another 4
characters to be typed in.
EMP Access Pre-boot Only EMP is only enabled during
power down through end of POST.
COM2 is returned to system use
at the end of POST when
operating system boots.
Always Active EMP is always enabled. COM2
cannot be used by operating
system. It is now dedicated for
EMP use.
Disabled EMP is Disabled. COM2 is
always available for system use
by console redirection or
operating system.
EMP Direct Direct Connect Sets how EMP connects to the
Connect/Modem server. Direct Connect means a
Mode null modem serial cable directly
connects COM2 connector port to
the EMP console machine.
Modem Mode Indicates that a modem is
connected on COM2 for EMP use.
System Management Submenu (continued)
Server Management Information Submenu
Feature Choices Description
Board Part N/A Information field only
Number
Board Serial N/A Information field only
Number
System Part N/A Information field only
Number
System Serial N/A Information field only
Number
Chassis Part N/A Information field only
Number
Chassis Serial N/A Information field only
Number
BMC Revision N/A Information field only
Primary N/A Information field only
HSB Revision
Items on this menu are set when the server board is
manufactured and cannot normally be changed. The last two
items refer to the firmware level of the BMC on the server
board and HSC (Hot Swap Controller). If circumstances
require a change in the L44GX+ server board’s firmware,
specific direction will be provided by Micron Technical
Support.