Product guide

46
Chapter Three Upgrading
Installing a Processor (continued)
7. Orient the processor so that the heat sink faces the I/O connectors. Slide
the processor into the retention mechanism. Push down firmly, with even
pressure on both sides of the top, until the processor is seated.
8. After you have installed the processor, you must configure its speed in
BIOS set-up.
Replacing the Back up Battery
The lithium battery on the server board powers the real time clock (RTC) for up to 10
years in the absence of power. When the battery starts to weaken, it loses voltage,
and the server settings stored in CMOS RAM in the RTC (for example, the date and
time) may be wrong. Contact your micronpc.com sales representative for a list of
approved devices.
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the equipment manufacturer.
Discard used batteries according to manufacturer’s instructions.
Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun
ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til
leverandøren.
Lithiumbatteri - Eksplosjonsfare. Ved utskifting benyttes kun batteri som
anbefalt av apparatfabrikanten. Brukt batteri returneres apparatleverandøren.
Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en
ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt
batteri enligt fabrikantens instruktion.
Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo
ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo
valmistajan ohjeiden mukaisesti.
Warning
ADVARSEL!
Warning
VARNING
Warning
ADVARSEL
Warning
VAROITUS
Warning