Product guide

32
Fitting Into The 19-inch Rack
Mount
The chassis is a standard 19-inch server case, and can be placed into a 19-inch
rack mount easily. Contact micronpc.com sales to purchase the conversion kit.
Chapter Two System Features
Opening the Front Access
Panel
The front bezel is a removable access panel.
1.Open the lock to allow the panel to swing
open.
2.Remove the bezel from the hinges by
pulling the panel by the corners.
Hinges
Lock
Removing the Side Panel
Slide the panel about
10 mm or until it
stops and lift it out of
the tracks.
¬
¬
Retaining Screws
It is not necessary to remove the front bezel
to remove the side panel. If the server is
monitored by LanDesk, a record will be made
in the Event Log.
1.Remove the two thumb screws from the
back of the chassis.
2.Slide the panel toward the back about
10 mm or until it stops.
3.Lift the panel out of the track, be careful not
to allow the panel to fall.