Product guide

31
Feature Descriptions
Users can easily access, upgrade and maintain the system. The following are the
detailed descriptions of the features.
Front Bezel
The front bezel is designed as a removable door. With the front bezel open, the user
can access all drive bays directly without taking out any other components.
Access to the power switch and the reset button is blocked and untouchable when
the front bezel is closed. Any intentional or accidental shutdown by an unauthorized
user is prevented by the locking bezel.
A tinted, vertical oval-shaped plastic plate on the front bezel allows the user to
observe the LEDs that display server status even the front bezel is closed.
I/O Panel
All I/O panel attachment is made from the rear of the chassis. The metal I/O plate
is removable, and can be changed based on the form factors of the mainboard.
Cooling System
The server comes with two 80mm cooling fans that are located beneath the power
supply on the back panel of the chassis. The air is pulled through the front bezel of
the chassis, and flows across the components to exit out the back. One chassis
fan is attached to a variable speed control sensor that monitors the temperature
inside the chassis. The sensor will adjust the speed of the fan to effectively
maintain proper cooling of the server. A 92mm fan attached to the hard drive
module is also monitored by the variable speed control sensor. Should either fan
fail, the user is immediately notified by the error detection system.
Security
The server is protected from unauthorized access by a mechanical lock and an
electrical intruder detection system. The lock on the front bezel prohibits access to
CD-ROMs or hard disk drives. Additionally, two electrical intrusion detectors will
alarm whenever the front door or the side panel is opened.
Power Supply
The server comes with either a high performance and high efficiency 338-Watt
single power supply or a 350-Watt power supply module (1 + 1 redundant) that
provides stable power distribution to a fully loaded system.
Peripherals
The server case provides eleven drive bays, which consist of one 3.5-inch floppy
drive bay and ten 5.25-inch drive bays. The 3.5-inch floppy drive bay is vertically
sited on the middle-left of the front panel. The ten 5.25-inch drive bays are located
from top to bottom across the front panel.
Chapter Two System Features