Product guide

15
Chapter 2
System Features
Server Board Features
Feature Description
Processor Up to two Intel Pentium
®
II or Pentium
®
III processors (with 100 MHz
system bus) operating at 1.8 V to 3.5 V. The server board’s voltage
regulator is automatically programmed by the processor’s VID pins to
provide the required voltage.
Memory (DRAM) Four 72-bit sockets for 168-pin, gold contact, 100 MHz, ECC or non-ECC,
registered or unbuffered, SDRAM dual inline memory modules (DIMM).
PCI bus Four standard PCI (PCI-33/32-bit) expansion slots for add-in boards.
1x32-bit PCI bus. Embedded devices: Network Interface Controller (NIC)
and SCSI controller.
Two PCI-66 MHz 32-bit 5 V expansion slots (backward compatible to
PCI-33 MHz 32-bit).
ISA bus One ISA expansion slot for an add-in board. Embedded PC-compatible
support (serial, parallel, mouse, keyboard, diskette, and Plug and Play
features).
Server Management Thermal / voltage monitoring and error handling.
Real time clock/calendar (RTC).
Front panel controls and indicators (LEDs).
System Setup Utility (SSU).
Basic Input/Output System (BIOS), Power On Self Test (POST) and Setup
stored in flash memory.
Graphics Integrated onboard Cirrus Logic
®
CL-GD5480 super video graphics array
(SVGA) controller. Embedded: 2 MB of video memory.
SCSI Adaptec
®
AIC-7896, supporting onboard Ultra2 (LVD) wide and Ultra-
wide SCSI interfaces. Support for the Adaptec ARO-1130U2 RAID
Port
®
III card is built into PCI slot 4.
Network Integrated onboard NIC, an Intel
®
82559 single chip PCI LAN controller
for 10 or 100 Mbps TX Fast Ethernet networks. RJ-45 Ethernet connector
and indicator LEDs at I/O back panel.
System I/O PS/2-compatible keyboard and mouse ports, 6-pin DIN.
Advanced parallel port, supporting enhanced parallel port (EPP) level 1.7
and 1.9, enhanced capablities port (ECP) compatible 25-pin.
VGA video port, 15-pin. Two serial ports, 9-pin.
RJ-45 Ethernet port. Two USB ports.
Form Factor Server ATX form factor, 12 x 13 inches, ATX 2.01 compliant I/O.