Instruction manual

D-1
D
▼ ▼ ▼ ▼
Using a CD-ROM Drive
Should you need to install a CD-ROM, the Array1000xA Family
Manager Set drivers diskette included with the ARO-1130SA con-
tains the DOS and NetWare driver software you need in order to use
a CD-ROM controlled by the ARO-1130SA. This appendix explains
how to set up your CD-ROM drive so that you can initially install
your software.
Using a CD-ROM Drive with DOS
To operate a CD-ROM drive supported by the ARO-1130SA under
DOS, you need
■
The SCSI driver,
aspi8dos.sys
(version 1.32 or later)
■
The CD-ROM driver,
aspicd.sys
■
The Microsoft CD-ROM extensions,
mscdex.exe
The
aspi8dos.sys
and
aspicd.sys
files must be copied from the
\dos
directory on the Adaptec Array 1000xA Family Manager Set driver
diskette to a directory (e.g.,
c:\scsi
) on your hard disk drive. The
mscdex
.
exe
file is included with MS-DOS 6.x and above (see your
MS-DOS documentation for details).
Note:
If you use MS-DOS 5 and do not have
mscdex.exe
, we
recommend that you upgrade to MS-DOS 6 or above. You
can also obtain
mscdex.exe
from Microsoft’s online bulletin
board or the CompuServe forum.