Instruction manual

3-1
3
▼ ▼ ▼ ▼
Using the Array1000xA
BIOS & Driver Selection
Utility
Whenever you install a new ARO-1130SA in your server and before
you run the Adaptec Array
Config
SA program to create the first
array in your system, always run the Array1000xA BIOS & Driver
Selection Utility.
Caution:
We highly recommend that you back up the data on
your array(s) before you use the Array1000xA BIOS & Driver
Selection Utility. This ensures that your data is completely
protected.
The Array1000xA BIOS & Driver Selection Utility installs the
ARO-1130SA BIOS by automatically updating (flashing) the correct
ARO-1130SA BIOS. The utility also determines which of the two
Manager Set driver diskettes (Disk A or Disk B) is required when
you install the operating system driver, as explained in Chapter 5
and Chapter 6.