Specifications

I/A 70 Series Backup and Restore

Version 3.0 - Network and local peripherals

Illustration 18 Perform a clean shutdown.

This last option will save you the default 30 seconds pre-shutdown delay.

Allow the station to shutdown and reboot and this will take some time (expect up to several

minutes to completion). When the system is on line again shutdown the system once more and

proceed with the backup procedure.

8.4 Creating support diskettes from the CD files.

On the CD-ROM you can find some files with the “.DSK” extension. These are image files created

from diskettes. They can be used to create diskettes again by using this procedure.

If you need any of the additional diskettes, you can create them directly from the CD-ROM menus.

From the Main menu option select “F] Utilities.“. Here you will find the options to create the most

common diskettes for this tool.

There may be some reason you can not use this or maybe you have the need to create them on a

system that can not be booted. In that case there is another way to create the diskettes:

Insert the CD-ROM in a Windows machine (preferably in the CD-ROM drive) open a command tool

and change directories to where the diskette images are located, for instance:

E:<cr> (Where E: is the drive letter of the CD-ROM drive).

cd \diskette<cr>.

Find the image for the diskette you want to create and type

\tools\file2dsk fcomp_20.dsk<cr>.

This command will write the file ”fcomp_12.dsk“ to a 3.5” diskette in the ”a:“ drive of the machine.

Background information.

Page