Specifications

I/A 70 Series Backup and Restore

Version 3.0 - Network and local peripherals

Norton Ghost is the “backup application” used this generally implies: Hardware that is not

supported by Norton Ghost is not supported by the I/A 70 Series Backup and Restore CD.

Hardware Not supported with this release:

● Any PCMCIA device (no DOS support)

● Floppy and IDE tape drives. This includes the different TR-3 and TR-4 tape drives. (Typical

storage capacity is 1.6 or 3.2 Gb).

● Floppy disk drives for use as a backup device.

● The Imation LS-120 superfloppy drives. (No DOS drivers on the CD)

8.3 Checking the system drive(s).

It is strongly advised to check the integrity of the system drive(s) prior to making a backup.

Windows NT provides the tools for this and this section attempts to explain the procedure.

Repeat the steps below for drive D:

1. To check the C: drive go to “My Computer” and “right click” on the icon for drive C:

2. Select the “Tools” tab and click in Check Now…

You will get a new window where you check both boxes reading Automatically fix file system

errors and Scan and attempt recovery of bad sectors.

3. When you press Start you will receive a prompt stating that the drive will be checked after the

next reboot. Select Yes to perform the check during the next reboot.

Repeat the steps above for drive D:

After doing this the system must be rebooted. Follow the Foxboro guidelines for this by either:

Selecting “SftMnt/Shutdown/Reboot…/Shutdown and Reboot“ from the top menu bar in

FoxView or see here:

Illustration 17 Shutdown from the Foxview menu.

Or you can run “foxshutdown 1 1 1 “ in the “run” dialog. (Start/Run…) as shown here.

Page

Background information.