Specifications

I/A 70 Series Backup and Restore

Version 3.0 - Network and local peripherals

1. Identify the system drive and make sure it is working, replace if necessary.

2. Locate the most recent valid backup tape and have it ready for the restore.

3. Attach the tape drive if it is an external version.

4. Insert the I/A 70 Series Backup and Restore CD in the CD-ROM drive and boot the station and

insert the tape in the tape drive.

5. Choose the first menu option: 5. Internal IDE/ATAPI and SCSI hardware only. and allow the

station to finish booting.

6. In the Main menu choose: [B] The Restore menu. And next choose: [A] Restore from tape. (If

you get the “Timeout” dialog during this step, press “wait”. Ghost appears to be a little impatient

with tape drives)

7. The restore will present the Norton Ghost menu where the user must confirm the restore and

after this, the restore is started. After a successful completion you are prompted to either

“Continue” or “Reset” the system. If you choose “Reset” please remove the CD-ROM from the

drive first. “Continue” returns you to the main menu.

8. Reboot the station and, if applicable, allow the “check disk” program to finish.

7.2.2 Restore from a removable medium.

To restore the system from one or more removable media:

1. Identify the system drive and make sure it is working and replace if necessary.

2. Attach the backup drive if it is an external version. (For example a SCSI MO or Jaz drive).

3. Insert the I/A 70 Series Backup and Restore CD in the CD-ROM drive and boot the station.

4. Choose one of the menus options that covers you hardware: (likely option 1 Internal

IDE/ATAPI hardware. or 5. Internal IDE/ATAPI and SCSI hardware only.) and allow the

station to finish booting.

5. In the Main menu choose: [B] The Restore menu. and next choose: [B] Restore first drive

from MO or Jaz drive.

6. The restore will present the Norton Ghost menu where you must confirm the restore and after

this, the procedure is started. After a successful completion you are prompted to either

“Continue” or “Reset” the system. If you choose “Reset” please remove the CD-ROM from the

drive first. “Continue” returns you to the main menu.

7. Reboot the station and, if applicable, allow the “check disk” program to finish.

7.2.3 Restore from DVD/CD-ROM.

The “restore from CD-ROM” of course requires a CD/DVD-ROM drive to be present in the system.

The steps to restore from a CD/DVD are:

1. Identify the system drive and make sure it is working.

2. Insert the I/A 70 Series Backup and Restore CD or the bootable first Backup CD in the CD-ROM

drive and boot the AW.

3. Choose the matching menu option and allow the station to finish booting.

4. When you have booted from the I/A 70 Series Backup and Restore CD replace the I/A 70 Series

Backup and Restore CD with the CD containing the backup image. (The image name should be

Page

Quick start.