Specifications

I/A 70 Series Backup and Restore
Version 3.0 - Network and local peripherals
3. Properly shutdown the system to allow the file system to be cleanly unmounted.
4. Attach the backup drive to the system if it is an external device. (for instance a Jaz or MO drive).
5. Insert the I/A 70 Series Backup and Restore CD in the CD-ROM drive and boot the system from
CD-ROM.
6. Choose one of the menu options that matches you hardware (likely option 1 Internal
IDE/ATAPI hardware. or 5. Internal IDE/ATAPI and SCSI hardware only.). And allow the
station to finish booting.
7. In the Main menu choose: [A] The Backup menu. And next choose: [B] Backup to MO or Jaz
drive
8. The backup will start and after a successful backup, you are prompter to verify the image
9. After completion you are returned to the main menu.
10. You may get a warning that the target is too small to hold the backup. Ghost suggests enabling
“spanning”. Accept this to make the backup on multiple media.
11. Remove the drive from the system if applicable.
12. Remove the I/A 70 Series Backup and Restore CD from the CD-ROM drive.
13. Label the backup medium and store it in a safe place.
14. Reboot the station.
7.1.3 Backup to CD-R(W).
Warning!:
You may not be able to restore from copies you have made from the CD/DVD's created with
Ghost.
To create a backup to one or more CD/DVD's take the following steps:
1. Make sure the CD-R(W) drive is working.
2. Check the hard disk using the standard Windows tools.
3. Properly shutdown the AW to allow the file system to be cleanly unmounted.
4. Insert the I/A 70 Series Backup and Restore CD in the CD-ROM drive and boot the AW.
5. Choose the menu option that matches your hardware. (ATAPI, USB or Firewire drivers may be
required)
6. In the Main menu choose: [A] The Backup options menu. And next choose: option [C] or [D]
to backup to CD/DVD media.
7. You will get the option to make the DVD/CD-R(W) bootable. This option will make the backup a
bootable CD which is very convenient. The boot floppy that Ghost is requesting is going to be
read from the I/A 70 Series Backup and Restore CD so you won’t need a floppy.
8. When prompted: “Copy a bootable floppy to the CD-R disk?” answer “Yes”.
9. When prompted: “Is the floppy disk ready in drive a:?” answer “Yes” (The boot image will be
read from the Backup and Restore CD).
10. When prompted: “Proceed with Drive Backup to CD-R?”: If the CD-R(W) drive is the one you
have booted from, replace the I/A 70 Series Backup and Restore CD with an empty CD/DVD disk
and press “Yes”.
11. After a successful backup, you are returned to the main menu.
Page
Page
38
38
of
of
51
51
Quick start.
Quick start.