Specifications

I/A 70 Series Backup and Restore
Version 3.0 - Network and local peripherals
[A] Create a Backup and Restore diskette.
If you system does not allow you to boot directly from CD, here you can create a boot
floppy that may be a workaround. You will still need the Backup and Restore CD in the CD-
ROM drive.
[B] Create a PC-DOS FW/USB 2.0 disk for backup to USB hard disks.
When you want to create a backup to a USB FAT32 formatted drive, you may need this
floppy and boot from that.
[R] Return to the Main menu MO Formatter
Allows you to initialize your MO media prior to a backup.
6.3 Backup to shared drive (Network interface.....)
From the main menu all options except 1 will configure a certain (familly of) network interface(s).
If you are not sure you have hooked up the correct interface make sure you observe the messages
passing by as you boot the system. They may indicate problems.
When all goes well you should end up with the screen below. This shows you the defaults.
By default, the driver letter assigned to the network share is M:
Page
Page
30
30
of
of
51
51
CD 2 – Backup and Restore with shared network resources.
CD 2 – Backup and Restore with shared network resources.
Illustration 11 CD2 -Support diskette menu