User`s guide

9
Starting the SCSI
Select
Utility
You can start the SCSISelect utility by pressing Ctrl-A
when the following prompt appears at boot time:
Press <Ctrl><A> for SCSISelect (TM) Utility!
The first menu that appears displays the options
Configure/View Host Adapter Settings and SCSI
Disk Utilities.
Using SCSI
Select
Menus
SCSISelect uses menus to list options you can select.
To select an option, use the
↑
and
↓
keys to move the
cursor to the option, then press Enter.
In some cases, selecting an option displays another
menu. You can return to the previous menu at any
time by pressing Esc. To restore the original SCSISelect
default values, press F6. To toggle the display
between color and monochrome modes, press F5 (this
feature may not work on some kinds of monitors).
Exiting SCSI
Select
To exit SCSISelect, press Esc until a message prompts
you to exit (if you changed any AHA-2940Ultra/
2940Ultra Wide settings, you are prompted to save
the changes before you exit). At the prompt, select
Yes to exit, then press any key to reboot the com-
puter. Any changes you made in SCSISelect take
effect after the computer boots.
Using the SCSI Disk Utilities
To access the SCSI disk utilities, select the SCSI Disk
Utilities option from the menu that appears after start-
ing SCSISelect. Once the option is selected, SCSISelect
Support Removable Disks Under BIOS as
Fixed Disks
4
Boot only
Display <Ctrl-A> Message During BIOS
Initialization
4
Enabled
BIOS Support for Bootable CD-ROMs
4
Enabled
BIOS Support for Int13 Extensions
4
Enabled
1
Setting is valid only if Multiple LUN Support is enabled
2
For AHA-2940 Ultra only
3
For AHA-2940 Ultra Wide only
4
Settings are valid only if host adapter BIOS is enabled