Specifications

7. The program automatically starts the change-ha utility, which
allows you to change the adapter type of any SCSI device. You
see a screen similar to this:
The SCSI configuration file has entries for
the following devices:
Host
Adapter Adapter
Type Devices
Number ID
LUN
ad disk 0 0
0
ad tape 0
2
0
Standard mode and eiad for Enhanced mode. The default is ad
for Standard mode.
If you change the Host Adapter Type, the program prompts
you to enter the new host adapter prefix for each device
attached to the interface. Enter
ad to select Standard mode or
eiad to select Enhanced mode.
When you have responded to all entries, change-ha displays
the new SCSI configuration. You see this prompt:
Do you wish to change the Host Adapter Type
for any of these entries? (y/n)
8. When the configuration is complete, press N to leave
change-ha. You see this message:
A new kernel must be built to reflect the
changes to the SCSI configuration.
Do you want to do this now? (y/n)
7-4
Installing Software Drivers for UNIX