Specifications

Installing the UNIX SCSI Manager
Before you can install the UNIX SCSI Manager files, you must
install UNIX on your hard disk.
Note
When you install UNIX, the SCSI adapter card must be in Standard
mode.
If you change to Enhanced mode when you install the UNIX SCSI
Manager, you must run the System Configuration program again to
change to Enhanced mode.
After installing UNIX, follow these steps:
1.
2.
3.
4.
5.
6.
At the root directory, type CUSTOM and press Enter. The Install
program displays the Custom main menu and highlights the
Install option.
Press
Enter to select Install. You see the new product screen.
Choose A New Product from the menu and press Enter. You
see
the Choose an option selection.
Press
Enter to select the Entire Product option. The
program prompts you to insert distribution volume 1.
Insert the UNIX SCSI Manager diskette into drive A and press
Enter. The program displays various messages to alert you to
the progress of the installation.
If you have not installed Link Kit, you are prompted
to do so
now.
If you have installed Link Kit, you see this message:
Updating system configuration...
Installing Software Drivers for UNIX
7-3