Specifications

See the NetWare installation manual to complete these steps:
❏ Link/Configure NetWare Operating System
❏ Link/Configure File Server Utilities
❏ NetWare Installation.
Error Messages
You may see one of the following error messages during
installation of the NetWare 286 SCSI driver:
Can't get a byte due to Data port not FULL.
Can't send a byte due to Command/Data port still
FULL.
Configuration data contains no DMA channel.
Configuration data contains no interrupt channel.
Host Adapter is not idle while trying to reset
interrupt.
Host Adapter Not Configured to proper
IO port
address.
Host Adapter Not Configured to proper
IO
interrupt channel.
Host Adapter Not Configured to proper IO DMA
channel.
INQUIRY command Completed with Error or Time Out.
READ CAPACITY command Completed with Error or
Time out.
Test Unit Ready command Completed with Error or
Time out.
6-30 Installing Software Drivers for Novell NetWare 286/386