Specifications

3.
4.
5.
6.
Configure the driver at channel 0 to the correct I/O port, DMA
channel, and Interrupt channel. When configuring the driver
at channel 1, NetWare displays only a subset of the total
number of configuration options. The menu looks similar to
this:
Available Disk Configurations
19: For SCSI disk(s) attached to CHO AH-154x/1640 only
20: For SCSI disk(s) attached to CH1 AH-154x/1640 only
21: For SCSI disk(s) attached to CH2 AH-154x/1640 only
22: For SCSI disk(s) attached to CH3 AH-154x/1640 only
23: For SCSI disk(s) attached to CH4 AH-154x/1640 only
29: I/O port - 334h. IRQ - 10. DMA - 7 WRITE VERIFY
30: I/O port - 334h. IRQ - 15. DMA - 7 WRITE VERIFY
31: I/O port - 334h. IRQ - 10. DMA - 0 WRITE VERIFY
Use • and • to scroll through the options.
Select the option that corresponds to the channel used to
configure the correct DMA channel and Interrupt channel.
After configuring all the drivers in the Configure Drivers /
Resources menu, you can verify the current configuration.
The screen looks similar to this:
Selected Configurations
option 0: IRQ
- 3. I/O Base - 300h. no DMA
Or ROM
Network Address: 3
OS Type: SFT Netware 286 with TTS
Communication Buffers: 40
Disk Chan. 0: Adaptec AHA-154x/1640 Host Adapter ver 3.1
Option 1: I/O port - 330h. IRQ - 11, DMA - 5
Disk Chan. 1: Adaptec AHA-154x/1640 Host Adapter ver 3.1
Option 19: For SCSI disk(s) attached to CHO AHA-1540/1640 only
When the configuration is correct, press Esc to return to the
main menu. Choose Save Selections and Continue to
complete the NetWare installation.
Installing Software Drivers for Novell NetWare 286/386 6-29