Specifications

The procedure for duplexing requires that you load the NetWare
286 driver twice. Follow these steps:
1.
2.
3.
Follow the standard installation procedure for loading the
driver. Load the driver from the Selected Disk Drivers
menu.
You may see a message that indicates there is not enough
memory. You must configure the driver.
If you see this message, go to the Configure Drivers /
Resources menu and configure any drivers. Then return to
the Select Disk Drivers menu and load the NetWare 286 driver
into channel 1.
When both drivers are successfully selected, the Selected
D i s k D r i ve r s list displays both drivers.
Configure the NetWare 286 driver with the option that
corresponds to the settings of the SCSI adapter card. When
you configure the NetWare 286 driver at channel 1 from the
Configure Drivers / Resources menu, the program displays
only a subset of the total number of configurations. NetWare
does not display any configuration that conflicts with the
driver at channel 0.
Select Save Selections and Continue. After linking and
configuring the NetWare Operating System and File Server
Utilities, select NetWare Installation.
See the NetWare installation manual for instructions on
running COMPSURF, which is listed in the
Analyze Disk
Surface option.
The rest of the steps for duplexing your disk drives are exactly the
same as for mirroring. See steps 3 through 8 of the disk mirroring
procedure described above (pages 6-24 and 6-25) to complete the
disk duplexing configuration.
InstaIling Sofbvare Drivers for Novell NetWare 286/386
6-27