Specifications

Code Message Description
203 Invalid ‘slot’ setting, use 1-15.
204
Invalid ‘verbose’ setting, use ‘y’
205
Invalid ‘removable’ setting,
use ‘off
206 Invalid ‘fixed-disk’ setting,
use ‘off’
You entered an invalid slot
number on the command line.
Valid slot numbers are from 1
to 15.
You entered an invalid VERBOSE
value on the command line. Set
the VERBOSE value to Y
(VERBOSE=Y).
You entered an invalid
REMOVABLE value on the
command line. Set the
REMOVABLE value to OFF
(REMOVABLE=OFF).
Installing Drivers for Net Ware 286
Version 2.15C
You can use NetWare 286 with the SCSI adapter card in Standard
mode only.
To install the SCSI driver for NetWare 286 version 2.15C, you
must relink NetWare. Use the NETGEN.EXE program to assign a
file server. NETGEN includes the following four Run Options:
❏ Standard (diskettes)
❏ RAM disk
❏ Hard disk
❏ Network drive.
Installing Software Drivers for Novell NetWare 286/386 6-17