Specifications

Code Message
001 Unable to reserve hardware,
possible conflict
Description
The driver failed to reserve the
hardware (DMA and IRQ)
settings of the SCSI adapter
card. Another option card in
your computer may be in
conflict with the SCSI adapter
card.
002 NetWare rejected card -
The driver failed to register the
Failed AddDiskCard call
SCSI adapter card with NetWare
386. You may not have enough
memory in your file server.
NetWare rejected card -
Version 3.1/3.11 message
Failed AddDiskSystem call
003
Invalid command line option
You entered an invalid option on
entered ➞ option
the command line. The message
displays the invalid option.
004 invalid command line, You entered an invalid
please enter correctly
command line. Reenter the
command.
005
Unable to load driver -
The computer was unable to
not enough memory? load the driver into memory.
You may not have enough
memory in your file server.
Version 3.1/3.11 only.
200 No host adapter found for
The driver was unable to locate
this driver to register the SCSI adapter card. Make
sure the card is properly inserted
and configured.
201 Host adapter not configured The SCSI adapter card is
for enhanced mode configured for Standard mode
rather than Enhanced mode.
Use the System Configuration
program described in Chapter 3
to configure the SCSI adapter
card for Enhanced mode.
202
Unable to read host adapter The driver cannot read the
configuration
configuration data for the SCSI
adapter card. Make sure the
SCSI adapter card is properly
inserted and configured.
6-76 Installing Software Drivers for Novell NetWare 286/386