Specifications

NetWare Ready
Your SCSI adapter card and the AHA1740.DSK driver are fully
compatible with NetWare Ready. This means you can purchase an
Epson SCSI hard disk drive, connect it to your SCSI adapter card,
partition it, and create a volume without any incompatibility
concerns.
You can use NetWare Ready SCSI drives as well as standard SCSI
drives on a single SCSI adapter card. The NetWare drivers register
each drive accordingly.
Error Messages
If any error occurs during initialization, you see an error message
and the driver is not loaded. The format of the NetWare error
messages is:
ERR nnn:message
The nnn error code indicates the type of error as follows:
000 - 099 Indicates the error is not specific to the SCSI
adapter card.
200 - 299 Indicates the error is specific to the AHA-1740 SCSI
adapter card.
The table below lists the possible error codes and messages.
Differences between NetWare version 3.0 and 3.1/3.11 error
messages are noted.
Code Message
000 Failed ParselOParameters call
Failed ParseDriverParameters call
I
Description
A call to the NetWare 386
ParselOParameters routine failed
for some unknown reason. The
command line may contain an
error or you pressed Esc at the
port or slot prompt.
Version 3.1/3.11 message.
Installing Software Drivers for Novell NetWare 286/386
6-15