Specifications

When preparing your SCSI adapter cards and hard disk drives for
duplexing, follow these guidelines:
❏ Make the NetWare partitions about the same size. You cannot
mirror partitions that vary greatly in size. See the NetWare
installation manual for limitations.
❏ Connect each hard disk drive to its own SCSI adapter card.
❏ Make sure the interrupt and DMA channels are different for
each SCSI adapter card.
You install duplexing after you install the SCSI driver and the ASPI
NetWare Manager for each SCSI adapter card in the file server.
When you install more than one SCSI adapter card in the file
server, the screen looks similar to this:
Loading module AHA1740.DSK
Auto-loading Module ASPITRAN.DSK
AHA- ASPI Manager & SCSI Disk Driver For
NetWare 386 v3.1
Version 2.0
Loading module AHA1740.DSK
AHA- ASPI Manager & SCSI Disk Driver For
NetWare 386 v3.1
Version 2.0
The NetWare procedure for installing duplexed disk drives is the
same as installing mirrored drives. See the instructions in “Disk
Mirroring” for details.
NetWare Guidelines
This section describes various guidelines to follow when installing
a SCSI adapter card in a NetWare environment.
Ins talling Software Drivers for Novell NetWare 286/386
6-11