Specifications

Option Values
BUS-ON= 2-15
Description
Sets the bus-on time for the SCSI adapter
card. Units are in microseconds. The
default is 11 µsec. (Standard mode only.)
BUS-OFF= l-64
Sets the bus-off time for the SCSI adapter
card. Units are in microseconds. The
default is 4 µsec. (Standard mode only.)
SLOT= l-8
Selects the host adapter’s slot location.
If you do not specify the slot number,
you are prompted for one. (Standard
mode only.)
VERBOSE=
Y or N
Displays the SCSI configuration
information during startup.
REMOVABLE= OFF
ON
Disables support for removable media.
You may want to disable removable disk
support in order to load your own ASPI
Removable Disk Module. The default
setting is off.
FIXED-DISK= OFF
ON
Disables support for hard disk drives. You
may want to disable hard disk support in
order to load your own ASPI Hard Disk
Module. The default setting is off.
DEV_ENABLE=
00-FF
Enables the driver to register SCSI
devices on an individual basis. Values are
hexadecimal. For example:
DEV_ENABLE=05
enables registering of devices 0 and 2.
You specify the devices you want to
register, which disables the other SCSI
devices.
You may want to disable registering of a
SCSI device in order to load your own
ASPI module.
This option is valid for NetWare 386
version 3.1 or 3.11 only.
Installing Software Drivers for Novell NetWare 286/386 6-5