Specifications

4. Enter the port address or slot number of the SCSI adapter card.
SERVER does not display the port addresses or slot numbers
assigned to other devices.
You can automatically assign the port address or slot number of
the SCSI adapter card when you enter the LOAD command by
typing one of the following:
LOAD A:\NET386.30\ASW1440.DSK PORT-nnn [options]
LOAD A:\NET386.31\AHA1540.DSK SLOT-n [options]
LOAD A:\NET386.311\AHA174O.DSK SLOT-n
[options]
If you have more than one SCSI adapter card installed in your
server, you need to load the driver once for each card. Each driver
must specify a unique port address for the card. See your NetWare
documentation for information on installing other NetWare
Loadable Modules (NLMs).
Command Line Options
You can specify the following options in the LOAD command.
Option
PORT=
Values
330
334
234
230
134
130
Description
Specifies the port address (in
hexadecimal) of the SCSI adapter card.
If you do not enter this option, SERVER
prompts you for the port. (Standard
mode only.)
SPEED=
00-FF
Sets the Bus Master transfer speed.
Values are hexadecimal 00-FF
00=5.0MB/sec.
01=6.7MB/sec.
02=8.0MB/sec.
03=10.0MB/sec.
04=5.7MB/sec.
Default is 00 (5.OMB/sec.). This option
overrides the speed setting of the SCSI
adapter card. (Standard mode only.)
6-4
Installing Software Drivers for Novell NetWare 286/386