Specifications

I
Installing Software
6
Drivers for Novell
NetWare 286/386
After configuring your system for use with the SCSI interface, you
need to install software drivers so that your operating system
recognizes and accesses the SCSI devices.
If you installed the SCSI adapter card in a Novell NetWare file
server, you need to install the Advanced SCSI Programming
Interface (ASPI) NetWare Manager. NetWare uses the ASPI
NetWare Manager to communicate with the SCSI adapter card
and to access the devices connected to the SCSI interface.
The SCSI adapter card supports these versions of NetWare:
o NetWare 286 version 2.15C (SFT or Advanced)-Standard
mode only
o NetWare 386 version 3.0-Standard mode only
o NetWare 386 version 3.1-Standard and Enhanced modes
o NetWare 386 version 3.1l-Standard and Enhanced modes.
Note
If you plan to use removable media, use NetWare 386 version 3.1.
Using removable media with NetWare 386 version 3.0 can cause
unexpected results.
Installing Software Drivers for Novell NetWare 286/386
6-1