Specifications

Any SCSI device driver can ATTACH to the ASPI OS/2 Manager to
pass requests to the SCSI interface.
Installing the ASPI OS/2 Manager
The ASPI OS/2 Manager files, ASPI40S2.SYS and SCSIO1.SYS, are
located on the ASPI OS/2 Manager diskette.
To install the files, you must reinstall OS/2 on your hard disk.
Follow these steps:
1. Make sure you are using a copy of the OS/2 Install diskette.
The diskette must not be write-protected.
2. Copy the SCSIOl.SYS file from the ASPI OS/2 Manager diskette
to the OS/2 Install diskette, renaming the file DISKOl.SYS.
For example, if the ASPI OS/2 Manager diskette is in drive B
and the OS/2 Install diskette is in drive A, type the following
and press Enter:
COPY B:SCSIOl.SYS A:DISKOl.SYS
3. Install OS/2 on your hard disk as described in your OS/2
documentation, using the program diskette in drive A. Make
sure this is the diskette to which you just copied the new
DISKOl.SYS file.
4.
When the installation is complete, copy the ASPI40S2.SYS file
from the ASPI OS/2 Manager diskette to the root directory of
the drive from which you boot the system.
If you have created a separate directory for device drivers, copy
the file to that directory. In this case, be sure to add the device
driver directory to the PATH command in your
AUTOEXEC.BAT file.
5. Modify your CONFIG.SYS file to include a DEVICE command
for the ASPI40S2.SYS driver as described in the next section.
See your OS/2 manuals for details on modifying your
CONFIG.SYS file.
5-2
Installing Software Drivers for OS/2