Specifications

Invalid entry for ‘/F' setting
You entered an invalid BUS OFF time with the /F switch. The
valid BUS OFF settings are 1 through 64; for example, /F5.
Invalid entry for '/N' setting
You entered an invalid BUS ON time with the /N switch. The
valid BUS ON settings are 2 through 15; for example, /N1O.
Invalid entry for ‘/P' setting
You entered an invalid port address with the /P switch. The
valid port settings are 130, 134, 230, 234, 330, and 334; for
example, /P334.
Invalid entry for ‘/X' setting
You entered an invalid speed setting with the /X switch.
The valid speed settings are 00 (hex) through 04 (hex); for
example, /X00.
Unable to initialize host adapter mailboxes
The driver was unable to initialize the mailbox base address for
the SCSI adapter card. Make sure that the adapter card is
securely connected to the option slot, that the jumpers are set
correctly, and that there are no hardware conflicts in your
computer configuration.
Unable to set Bus Master transfer rate
The driver was unable to set the Bus Master DMA transfer rate
for the SCSI adapter card. Make sure that the adapter card is
securely connected to the option slot, that the jumpers are set
correctly, and that there are no hardware conflicts in your
computer configuration.
Unable to set bus on/off timing
The driver was unable to set the bus on/off time for the SCSI
adapter card. Make sure that the adapter card is securely
connected to the option slot, that the jumpers are set
correctly, and that there are no hardware conflicts in your
computer configuration.
4-16 Installing Software Drivers for MS-DOS