Specifications

5.
6.
To create another partition, press Ins. If you create two
partitions, one 32MB partition and one 8MB partition, the
drive information window looks similar to this:
I
Type
Start
End Megs
DOS 0 31 32
DOS 32 39 8
When you have finished partitioning the hard disk, press Esc
to return to the Select SCSI Device to Partition
window. To partition another drive, select any other valid SCSI
disk drive.
You can partition only SCSI disk drives not supported by the
BIOS with AFDISK. If you select a disk drive that is controlled
by the system BIOS, AFDISK displays an error message. Simply
press Esc to continue.
When you have completed partitioning SCSI drives, press
Esc
at the Select SCSI Device to Partition window.
AFDISK displays the Exit AFDISK window. Press 1 to
highlight Yes and then press Enter.
You must reboot the computer before MS-DOS can recognize the
partitions you just created.
Installing Removable Media
ASPI4DOS.SYS or ASPIEDOS.SYS and ASPIDISK.SYS support
removable media. Follow these steps when installing a removable
SCSI device:
1. Set the SCSI ID on the removable device to 2, 3, 4, 5, or 6. See
the drive manual for instructions.
Installing Software Drivers for MS-DOS 4-13