Specifications

Deleting or creating a partition
To delete a partition, press ‹ or Œ to highlight the partition and
press
Del.
To create a partition, follow these steps:
1. Press ‹ or Œ to highlight the partition and press Ins. AFDISK
displays the Create a DOS Partition window:
Create a DOS Partition
Start Cylinder:
0
End Cylinder: 31
2. The Start Cylinder and End Cylinder values default to
the maximum values available on the disk. Press Enter to
select the default values; or press the arrow keys to move to
each field and then enter the desired cylinder number(s).
When the cylinder numbers are correct, press
Esc.
3. AFDISK displays the Create Partition window:
Create Partition? - <Fl> Help
No
Yes
To create the specified partition, press Πto highlight Yes and
then press
Enter.
If you decide to change the cylinder numbers, press Enter
when No is highlighted.
4-12
Installing Software Drivers for MS-DOS