Specifications

I
Installing the ASP/ Disk Driver
The filename of the device driver that installs the ASPI disk driver
is ASPIDISK.SYS. This file is located on the ASPI MS-DOS Manager
diskette.
To install the ASPIDISK.SYS file, follow these steps:
1.
2.
3.
Insert the ASPI MS-DOS Manager diskette into drive A of your
computer.
Copy the ASPIDISK.SYS file from the diskette in drive A
to the root directory of hard disk drive C. (Type
COPY A:ASPIDISK.SYS C:\ and press Enter.)
If you have created a separate directory for device drivers,
copy the file to that directory. Make sure the name of the
directory is included with the PATH command in your
AUTOEXEC.BAT file.
Modify your CONFIG.SYS file to include a DEVICE command
to install the ASPIDISK.SYS driver as described in the next
section.
See your MS-DOS manuals for details on modifying your
CONFIG.SYS file.
1 Using the DEVICE command
The ASPI disk driver uses the parameters and switches specified in
the DEVICE command to communicate with the SCSI adapter
card. Use the following format for the command:
DEVICE=d:\path\ASPIDISK.SYS [/D] [/Rnn]
Note
The DEVICE=ASPI4DOS.SYS or DEVICE=ASPIEDOS.SYS command
must precede the DEVICE=ASPIDISK.SYS command.
4-8
Installing Software Drivers for MS-DOS