Specifications

If you add the /D command line option (described in the next

section), you see a startup screen similar to the following:

AHA-1740/1744 (enhanced mode) ASPI Manager for DOS

Version 3.0

Host Adapter #:

Host Adapter SCSI ID: 7

Interrupt Level: 11

Slot Number:

Host Adapter #O-SCSI ID O-LUN 0: MAXTOR LXT-340SY

ASPIEDOS.SYS Installation Successful

WARNING! SHARE should be loaded for large media

MS-DOS Version 4.01

c:\>

Using the DEVICE command

The ASPI MS-DOS Manager uses the parameters and switches

specified in the DEVICE command to communicate with the SCSI

adapter card. Use the following format for the command:

DEVICE-d:\path\ASPI4DOS.$YS [/Pnnn] [/Dl [/L]

[/W;/WM] [/V;/VM] [/Xnn] [/Nnnl [/Fnnl [/I]

[/NORST]

DEVICE=d:\path\ASPIEDOS.SYS [/Sn] [/D] [/L]

Note

The DE VICE=ASPI4DOS.SYS or DE VICE=ASPIEDOS.SYS command

must precede the DE VICE commands

for

any other ASPI drivers and

any disk caching drivers, such as SMARTDRV.SYS. You install either

ASPI4DOS.SYS or ASPIEDOS.SYS; do not install both of these drivers.

You can include the following parameters and switches with the

DEVICE command for the ASPI4DOS.SYS or ASPIEDOS.SYS driver.

4-4

Installing Sofiware Drivers for MS-DOS