Specifications

The steps for installing the driver and defining the DEVICE
command are exactly the same for both drivers. The only
difference is whether you plan to run in Standard mode or
Enhanced mode. Make sure the driver you install matches the
mode you selected in the System Configuration program.
To install either the ASPMDOS.SYS file or the ASPIEDOS.SYS file,
follow these steps:
1.
2.
3.
Insert the ASPI MS-DOS Manager diskette into drive A of your
computer.
Copy the file from the diskette in drive A to the root directory
of hard disk drive
C. (Type COPY A:ASPI4DOS.SYS C:\ or
COPY A: ASP I EDOS . SY S C : \ and press Enter.)
If you have created a separate directory for device drivers,
copy the file to that directory. Make sure the name of the
directory is included with the PATH command in your
AUTOEXEC.BAT file.
Modify your CONFIG.SYS file to include a DEVICE command
to install either the ASPI4DOS.SYS driver or the ASPIEDOS.SYS
driver as described in the next section.
See your MS-DOS manuals for details on modifying your
CONFIG.SYS file.
When you boot the computer with the ASPI MS-DOS Manager
installed, you see a screen similar to the following:
AHA-1740/1744 (enhanced mode) ASPI Manager for DOS
Version 3.0
ASPIEDOS.SYS Installation Successful
WARNING! SHARE should be loaded for large media
MS-DOS Version 4.01
C:\>
Installing Software Drivers for MS-DOS 4-3