Specifications

❏ Set Enabl e Disconnection to yes to allow a device to go
off-line while performing an operation. This frees up the SCSI
interface and adapter for other operations.
❏ The Maximum Synch Xfer Rate option allows you to select
the highest data transfer speed that the SCSI adapter card will
attempt with the device. When you press
Enter for this option,
you see this menu:
( ) 10.0 MB/s
( ) 6.67 MB/s
( ) 5.0 MB/s
(
) 4.0 MB/s
( ) 3.33 MB/s
The SCSI adapter card supports rates up to the fast SCSI
maximum of 1OMB per second.
Exiting the Configuration Program
After viewing the SCSI configuration information, verify the
settings for the rest of your system configuration and make any
necessary changes. Then follow these steps to exit the program:
1. Move the cursor into the menu bar.
2. Select System from the menu bar options.
3. Select Exit.
4.
Selectthe Save configuration and exit option and press
Enter. You see a confirmation screen.
5. Press Enter again. The computer reboots.
If you just installed a SCSI hard disk drive in your computer and
configured it for your SCSI interface, you can now install the
operating system on the disk. See the chapter that describes the
SCSI drivers for your operating system to see if you need to install
any drivers.
Configuring Your System
3-9