Specifications

SCSI Configuration Options displays this menu:
( ) Standard mode configuration
(
) Enhanced mode configuration
Be sure to select the mode that you set for the Host
Adapter
Interface Mode.
Standard mode configuration options
If you select Standard mode, you see this menu:
Enable Parity Checking no
Initiate Synch Negotiation no
Enable Disconnection
no
You can set each option to yes or no.
❏
❏
❏
Set Enable Parity Checking to yes to allow the SCSI
adapter card to generate parity on data sent and received on
the SCSI interface.
Set Initiate Synch Negotiation to yes to allow the SCS1
adapter card to attempt to use the faster synchronous protocol
for data transfers on the SCSI interface. When set to no, data
transfers are done asynchronously, unless a SCSI device itself
requests synchronous negotiation.
Set Enable Disconnection to yes to allow a device to go
off-line while it completes a lengthy operation like a seek. This
allows the SCSI adapter to perform other operations on the
SCSI interface while a device. is temporarily disconnected.
If necessary, use Tab or the arrow keys to highlight a field and
press
Enter to toggle between no and yes. When the settings are
correct, press
Tab to highlight OK and then press Enter.
Configuring Your System 3-7