Specifications

9. Remove the Reference 1 diskette and insert the SCSI Adapter
Configuration Utilities diskette into drive A. Then press
Enter.
10. You see a menu listing the configuration files available on the
diskette. Follow the instructions on the screen to copy the
!ADPOOOO.CFG file to your Reference 1 diskette.
11. The program copies the files and then displays the message
Copy procedure complete. Press Enter to return to the
Configure Computer menu.
12. If you need to copy more CFG files from another diskette,
repeat steps 7 through 11 again for the next diskette. You may
be asked to reinsert the Reference 1 diskette.
Modifying the SCSI Parameters
Now you can configure your system. Follow these steps:
1. From the Configure Computer menu, select Configure
computer- advanced method. You see
the system
Configuration Overview screen, which displays information
about your computer’s processor board and any option cards
installed.
2. Highlight EISA SCSI Host Adapter and press Enter. The
configuration program displays the following screen:
Configuring Your System 3-3