Specifications

Using the Configuration Program
Using your computer’s System Configuration program, you copy
the configuration files from the Configuration Utilities diskette
and modify the necessary configuration parameters.
The procedures covered in the following sections are described in
detail in your EISA Series computer User’s Guide. If you have any
questions regarding the System Configuration program, see your
User’s Guide.
Copying the Configuration Files
To copy the configuration files from the SCSI diskette to your
Reference 1 diskette, follow these steps:
1.
2.
3.
4.
5.
6.
7.
8.
Insert the Reference 1 diskette in drive A.
Turn on any external SCSI devices.
Turn on or reset the computer. You see error messages similar
to the following:
Configuration error for slot 1 -
Please run CONFIGURATION UTILITY
Hard disk controller failure
Press Fl to continue
Press Fl.
When you see the System Configuration screen, press any key
to continue.
If you see an error message regarding CMOS, press Enter to
continue.
From the Main Menu, select the Configure computer
option.
From the Configure Computer menu, select the
Copy
configuration (CFG) files option.
3-2
Configuring Your System